Black Mamba (V3)


Category: Frames and Bundles

This is a high-speed FPV racer purpose built for 8" propellers, GoPro or Mobius Camera, and freestyle funWith its pair of spar arm tubes and circular clamping system, rotors can be angled forward 5-10 degrees to gain an aerodynamic advantage during forward flight and a visual advantage with your FPV camera.  The 350 mm size (and 35mm space between main plates) is large enough to ease the installation of FPV gear and be flown line-of-sight, yet agile and stable enough for excellent quality video. The carbon fiber frame maximizes strength and durability while minimizing weight and vibration. The V3 is the ultimate Black Mamba with integrated GoPro cage, silicon lined composite tube clamps, and glass-filled composite landing gear.  With the 1450kv motors and 8 x 4.5" propellers, this Black Mamba a high speed cruiser yet still has the agility for proximity flying. 

Bundles include everything you need to build a flyable quad.


  • 350mm diagonal motor-to-motor
  • All-up-weight 935g with GoPro and full FPV gear
  • 35mm height between main frame plates
Frame kit includes:
  • 1.5mm twill-weave matt finish carbon fiber plates (Top and bottom main plates, battery/gear plate, GoPro hood, GoPro/Mobius mount, CCD plate, video transmitter cover)
  • 2 x arm tubes (twill weave matt finish carbon fiber)
  • 1 x spare arm tube
  • 4 x motor mounts (3mm twill-weave matt finish carbon fiber)
  • 12 x arm clamps (silicon lined composite)
  • Wide-stance landing gear (glass-filled black poly)
  • 8 x silicon rubber camera bay and mount bobbins
  • Anodized aluminum M4 screws, nylon standoffs, and nylon screws.
  • Flight Controller standoffs and screws
  • Illustrated Assembly Manual
Complete Bundle adds everything you need to complete a flyable quad with the recommended setup:
  • BetaflightF3 Flight Controller with PDB and OSD
  • 4 x 30A Cicada BLHeli-S DShot-600 ESCs
  • 4 x ZTW SP2212 1450kv Spider PRO Race Motors
  • Lost rig buzzer
  • XT60 Battery Power lead (150mm)
  • Set of APC 8 x 4.5" MR props
  • Motor screws 16*M3x6mm
  • 18 AWG motor wire extensions with heat shrink
  • Battery strap, velcro tabs for battery tie-down, cable ties.
Complete Bundle with FPV also adds:
  • TBS UNIFY PRO HV RACE 25/200mW 5.8GHz Video Transmitter (SMA)
  • Foxeer HS1177 with 2.5mm lens
  • TBS Triumph Stubby antenna SMA (1pc)
Recommended Battery:
  • Tattu 3700mah 4S 45C
  • Tattu 2300mah 4S 45C
  • Rotatable arms 5-10 degrees. This gets you an optimal view of the horizon from your FPV camera and reduces air-drag.
  • Full twill weave carbon fiber frame with integrated GoPro bay, carbon fiber arm tubes, carbon fiber motor mounts.
  • Camera bay/mount that integrates a cushioned GoPro or Mobius for jello-free video
  • Silicon lined composite plastic arm clamps with standardized 16mm (OD) CF tubes.
  • Glass-filled poly plastic landing skids (black)
  • M4 nylon bolts create a crumple zone in a hard crash - greatly increases the chances of saving the arm tubes.
  • Large space between frame plates (35mm) for gear. Mounting points: inside, on top, and on bottom.
  • Large battery protective plate can mounted top or bottom and used as an extra gear mounting plate. 
  • Mount holes for encased board cameras. Plus a carbon fiber CCD board camera mount.
  • Large video transmitter bay and cover will easily fit all 600mW transmitters such as ImmersionRC and Boscam

Are you a new to multirotors? Need help assembling a quadcopter? See the RUSH build series here by Microsoft's Drone Garage

Customer Reviews

Based on 1 review Write a review

Related Items