RUSH 3 Inch

IN STOCK

The RUSH 3" is a micro racer designed for full size HS1177 FPV camera, full size ESCs and motors. Equipped with Quadrysteria 1804 2800kv motors, 3045-T Basher Bullnose props, and  4S power,  it has full size speed too!  However, for the less experienced pilot, go with a 3S power setup for a tamer flight experience.  The integrated FPV camera mount is designed for the HS1177 or HS1190 Mini Sony camera and allows a camera rake up to 80 degrees. The RUSH 3" is waiting for you to pilot it through small spaces at high speed!  

A 150mm wheelbase, this quad is constructed of 3.0mm unibody high quality twill weave carbon fiber for easy construction and durability.  The carbon fiber top plate, camera plates, XT60 port, and antenna "doubler" design is shared with the RUSH 4".  


Weight: 52g
AUW: 220g (without battery)

Included with every frame:
  • Frame hardware: red aluminum M3 screws and black aluminum standoffs
  • Nylon hardware for low profile PDB and FC mounting
  • XT60 connector (black)
  • 17.5cm Quadrysteria anti-slip Battery strap
  • Self-adhesive velcro squares for battery tie down
  • 3M double-side foam tape (for ESCs)
  • Exploded assembly schematic with instructions
Bundle adds everything you need to complete a flyable quad with the recommended setup:
  • X-Racer F303 SPI flight controller with buzzer
  • 4 x ZTW 25A BLHeli-S ESCs
  • 4 x Quadrysteria R1804 2800kv motors with nylock nuts
  • Matek stackable PDB with two BECs and video pads
  • one set of 3 x 3.5" tri-blade Quadrysteria Basher Bullnose props
  • 14 AWG silicon wire with heat shrink (battery pigtail)
Bundle with FPV also adds:
  • *NEWTBS UNIFY PRO HV RACE 25/200mW 5.8GHz Video Transmitter (SMA)
  • Foxeer HS1177 with 2.5mm lens
  • TBS Triumph antenna  (1pc)
Recommended Battery: 
  • 500 - 1100mAh 4S Lipo
  • 1050mAh 3S Lipo
Runcam Swift 3D printed FPV camera mount courtesy Peter Provost.
Recommended power setups:
  • FAST: 4S lipo, 3 x 4.5 x 3 QBB propellers with Quadrysteria 1804 2800kv motors. 
  • TAME: 3S lipo, 3 x 3 x 3 propellers with Quadrysteria 1804 2800kv motors.
  • BALLISTIC: 4S lipo, 3 x 4.5 x 3 QBB propellers with ZTW SP1806 3100kv motors.

Are you a new to multirotors? Need help assembling a quadcopter? See the RUSH build series here by Microsoft's Drone Garage


Category: Frames and Bundles


Related Items