Crossbones (5-Inch)


Crossbones is the result of collaboration and feedback with Quadrysteria Team Pilots who have 1-1/2 years on regional and national race circuits plus thousands of hours of hard proximity free riding! A frame designed by FPV racing and free-riding enthusiasts with versatility in component placement. Crossbones is a pod-like design with super low drag yet still allows a GoPro to be mounted.


Now produced using state-of-the art carbon fiber layup. A new twill layup using alternating 0 degree/45 degree/90 degree layers, significantly increases stiffness and strength


  • True X for 5" propellers, 210mm motor to motor
  • Fully independently removable arms with embedded nuts allowing simple installation and removal with eight titanium alloy screws
  • Ultra thin profile arms reduces prop drag at the thrust source (9.5mm wide) 
  • Stout 5.0mm arm thickness (4.0mm arms available for ultra light)
  • battery options: Top and Bottom mount (Bottom mount allows 0 or 90 degree battery orientation)
  • Horizontal SMA antenna portal with multiple VTX access cutouts
  • Secure FPV camera mount HS1177/HS1190/Runcam 
  • Foam landing pads

Weight:  76g (4.0mm arms)
Weight:  88g (5.0mm arms)

Included with every frame:
  • 3K twill weave matt finish carbon fiber parts (10 pcs)
  • Titanium alloy M3 arm screws (8 pcs)
  • Frame hardware: black aluminum standoffs with M3 red aluminum screws
  • Nylon hardware for low profile FC/PDB stack
  • AMass XT60 connector (yellow)
  • 25cm Quadrysteria anti-slip Battery strap
  • Antenna zip ties and heat shrink (red)
  • Self-adhesive velcro square for battery tie down
  • Four custom high density foam landing pads
  • Exploded assembly view
Bundle adds everything you need to complete a flyable quad with the recommended setup:
  • *NEW* BetaflightF3 Flight Controller with PDB and OSD
  • *NEW* 4 x Cicada 30A BLHeli-S individual DSHOT600 ESCs
  • *NEW* 4 x EMAX RS2205S 2300KV Race Spec motors
  • lost rig buzzer and 14AWG silicon battery lead wire 
  • 16 x M3 x 8mm black oxide socket cap motor screws for 5mm carbon mount
  • 5040 Triblade Quadrysteria Baser propellers
Bundle with FPV also adds:
  • TBS UNIFY PRO HV RACE 25/200mW 5.8GHz Video Transmitter (SMA)
  • Foxeer HS1177 with 2.5mm lens
  • TBS Triumph antenna (1pc)

AUW FPV gear: 320g (without battery)

Recommended power setup:
  • 1300mAh 4S Lipo,  2205-2500kv motors, 5" tri-blades or quad-blades
Optional GoPro Session mount (top center mount) made of flexible TPU. 
Optional GoPro mount (nose mount) made of flexible TPU.
Are you a new to multirotors? Need help assembling a quadcopter? See the RUSH build series here by Microsoft's Drone Garage

Related Items