Crossbones V2 (6-Inch)


Crossbones V2 is coming. Pre-Order now! 

ETA 14-Dec-17

What's new?
  • Machined from T700 QXC* Carbon Fiber Plate
  • Anodized red aluminum standoffs with knarled texture
  • Screw holes to securely mount TBS Unify pigtail
  • Improved motor mounting allows smaller motors for those striving for an ultra-light rig (from 12x12mm to 19x19mm)
  • All parts are compatible with V1

*QXC plates are constructed using a twill weave of the highest strength standard modulus fibers available - T700. These never-twisted carbon fibers are prepregged then bonded into a high strength armor plate. T700 fiber is used in a variety of industrial and recreational applications, including pressure vessels such as natural gas storage tanks and SCUBA breathing tanks.

Crossbones is the result of collaboration and feedback with Quadrysteria Team Pilots who have 2+ years on regional and national race circuits plus thousands of hours of hard proximity free riding! A frame designed by FPV racing and free-riding enthusiasts with versatility in component placement. Crossbones is a pod-like design with super low drag yet still allows a GoPro to be mounted.



  • True X for 6" propellers, 236mm motor to motor
  • Fully independently removable arms
  • Embedded nuts allowing simple installation and removal with eight titanium alloy screws
  • Ultra thin profile arms reduces prop drag at the thrust source (9.5mm wide) 
  • Stout 5.0mm arm thickness
  • battery options: Top and Bottom mount (Bottom mount allows 0 or 90 degree battery orientation)
  • Horizontal SMA antenna portal with multiple VTX access cutouts
  • Secure FPV camera mount HS1177/HS1190/Runcam 
  • Foam landing pads
  • Crossbones sticker!
Included with every frame:
  • 3K twill weave matt finish carbon fiber parts (10 pcs)
  • Titanium alloy M3 arm screws (8 pcs)
  • Frame hardware: black aluminum standoffs with M3 red aluminum screws
  • Nylon hardware for low profile FC/PDB stack
  • AMass XT60 connector (yellow)
  • 25cm Quadrysteria anti-slip Battery strap
  • Antenna zip ties and heat shrink (red)
  • Self-adhesive velcro square for battery tie down
  • Four custom high density foam landing pads
  • Exploded assembly view
Bundle adds everything you need to complete a flyable quad with the recommended setup:
  • BetaflightF4 Flight Controller with PDB and OSD
  • 4 x Cicada 30A BLHeli-S individual DSHOT600 ESCs
  • 4 x BrotherHobby Returner R4 2206 2400KV motors
  • lost rig buzzer and 14AWG silicon battery lead wire 
  • 16 x M3x8mm black oxide socket cap motor screws for 5mm carbon mount
  • APC 6x4EP twin blade propeller set with metric adapters
Bundle with FPV also adds:
  • TBS UNIFY PRO HV RACE 25/200mW 5.8GHz Video Transmitter (SMA)
  • Foxeer HS1177 V2 with 2.5mm lens
  • TBS Triumph antenna (1pc)

AUW FPV gear: 320g (without battery)

Recommended power setup:
  • 1300mAh 4S Lipo,  2205-2500kv motors, 5" tri-blades or quad-blades
Optional GoPro Session mount (top center mount) made of flexible TPU. 
Optional GoPro mount (nose mount) made of flexible TPU.
Are you a new to multirotors? Need help assembling a quadcopter? See the RUSH build series here by Microsoft's Drone Garage

Related Items